H-CAS and the two RAS are mostly high (they just do a peak low and come back to the high state). I have two Fat Agnus 8371 for the bad board, and both have the same behavior (L-CAS high) so I guess none of them is faulty. GitHub is home to over 50 million developers working together to host and review code, manage projects, and build software together. I also did the reverse test, no luck (this case I got a green screen). Ponyprog Serial Device Programmer Naruto Shippuden Episode 333 English Dubbed Animasi Bergerak Sasuke Uchiha. I tried to put it in the good board to test it, but it seems they are incompatible revisions: 8371 in the bad board, and 8372 in the good board. I removed the U35 (74LS244), just to be sure it wasn't keeping it high, but it seems the problem comes from the Fat Agnus chip. I've discovered the L-CAS from Fat Agnus is stuck high. Genius G540 USB programmer is a universal bios gal programmer. However I tested all the big chips with another good A500 (later revision) and they are ok. We are giving the software for G540 bios programmer for free. Save and fast, we are here to support you and your hardware. On you can find most up to date drivers ready for download. It's a RAM problem usually caused by RAM ICs, Fat Agnus, Gary, or by the logic glue in the middle. File Name: genius-g540-driver-for-windows-10.exe. I put a jumper, just for test, and at least I did one step ahead: at least I have a video signal. It simply didn't boot (no video signal) I checked EMI406 (it is a line filter in the later revisions of the A500, but a simple 1 ohm 1/4w resistor in rev 3) and it was cracked. I have a strange problem with an Amiga 500 rev 3 I picked up from the litter about 15 or 20 years ago.
0 kommentar(er)
